- Overview
- Specification
- Documentation
- Get Started
-
PHY6228超低功耗高性能无线通信系统级芯片，集成高性能32-bit MCU，射频灵敏度-99dBm@BLE 1Mbps，峰值收发功4.6/4mA，能效比超高，解决复杂场景无线连接稳定性和低功耗续航问题，拥有自主知识产权全通信协议栈。
PHY62系列芯片广泛应用于智能家居、智能穿戴、智慧照明、工业控制、医疗健康、AI语音、新能源汽车等工业级/消费级领域，芯片具备高性价比和高可靠性，已向百余家海内外物联网领域客户实现交付。文档下载
核心优势
灵活安全高性能低功耗系统级芯片架构
拥有国内极少数的自主知识产权全通信方案
高性能多模射频收发机，多场景平均应用功耗<10uA
强大RF linkbuget满足复杂使用场景无线应用需求
解决复杂场景无线连接稳定性和低功耗续航问题
芯片自适应校准、常规器件偏差满足宽温范围，如晶振频偏、温漂、老化等
存储资源满足工业级高温可靠性存储资源满足工业级高温可靠性
抗电源干扰、满足复杂电源工况
最小BOM仅需【一个1uF电容+一个16MHz晶振】
支持协议
应用场景
-
- High-performance Low-power 32-bit processor with SWD
- Memory
- 512KB in-system flash memory
- 64KB SRAM, all programmable retention in sleep mode
- 4-way instruction cache with 8KB Cache
- 96KB ROM
- 256bit eFuse
- 66 general purpose/mixed signal I/O pins
- GPIO status retention in off/sleep mode
- configurable as serial interface and programmable IO MUX function mapping
- can be configured for wake-up
- for triggering interrupt
- 6X PWM/2 X I2C/ 2X SPI/ 2X UART/ 4X DMA
- Σ-Δ ADC with 24bits resolution and a maximum ENOB of 22.6bits
- low power PGA, gain selectable from 1 to 512
- 5bits DAC
- 2 universal op-amp (OPA)
- LCD driver, 1/3 Bias and 1/4 Bias selectable, supports low power standby display:
- 4COM x 32SEG
- 6COM x 30SEG
- 8COM x 28SEG
- LED driver, supports up to 8 x 7 dot matrix scanning
- Voltage regulator (VSR) output: 2.4V~3.3V, 10mA drive capability for fast start-up
- internal 1.2V reference
- Silicon temperature sensor, calibrated to ±1°C accuracy over the -10°C to 40°C range
-
- 8-channel 12bit ADC with low noise voice PGA
- 6-channel 32bit timer, one watchdog timer
- Real Timer Counter (RTC)
- Power, Clock, Reset controller
- Flexible Power management
- Operating Voltage range 1.8V to 3.6V
- Embedded buck DC-DC and LDOs
-
- Battery monitor
- Power consumption
- 0.3uA @ OFF Mode (IO wake up only)
- 1uA @ Sleep Mode with 32KHz RTC
- 3uA @ Sleep Mode with 32KHz RTC and 32KByte SRAM retention
- 5uA @ Sleep Mode with 32KHz RTC and 64KByte SRAM retention
- Receive mode: 4mA @3.3V power supply
- Transmit mode: 4.6mA (0dBm output power) @3.3V power supply
- MCU: <60uA/MHz
- RC Oscillator hardware calibrations
- Internal High/Low frequency RC osc
- 32KHz RC osc for RTC with +/-500ppm accuracy
- 32MHz RC osc for HCLK with 3% accuracy
- High Speed Throughput
- Support BLE 2Mbps Protocol
- Support Data Length Extension
- Throughput up to 1.6Mbps (DLE+2Mbps)
-
- AoA/AoD Direction Finding
- Support SIG-Mesh Multi-Feature
- 2.4 GHz transceiver
- Compliant to Bluetooth 5.4
- Sensitivity:
-99dBm@BLE 1Mbps data rate
-105dBm@BLE 125Kbps data rate
-
- TX Power -20 to +10dBm in 3dB steps
- Single-pin antenna: no RF matching or RX/TX switching required
- RSSI (1dB resolution)
- Antenna array and optional off-chip RF PA/LNA control interface
- AES-128 encryption hardware
- Operating temperature:
- -40˚C ~+85 ˚C (Consumer)
- RoHS Package: QFN88(10mm x 10mm)/QFN64(8mm x 8mm)
- Applications: wearables, home and building, health and medical, industrial and manufacturing, PC/mobile/TV peripherals, internet of things (IoT)
-
-
开发套件
